| Item Description: |
1" Inlet/Outlet Ports (European Straight Threads)
Do be aware that some adapting may need to be done due to the threads. Mcmaster.com has suitable adapters to change to american threads or you can purchase our working station which has the pump, piping, pressure gauge, expansion vessel and flow control valve all with american threads already adapted so you can connect right to your system.
The pump is rated with a max lifting height is 5.4 meters (about 17 feet). However, if you can bleed out all of the air in your system and apply a bit of pressure to the fluid (we used our diaphragm pump) this pump can handle much higher heights when used in closed loop. The maximum height in closed loop is unkwown but we run approx 10 meters (32 feet) with plenty of head from many elbows and turns in our system and get good flow once the fluid is under some pressure (basically, no air pockets)
This heavy duty variable speed solar water heater pump is a must have. It operates very quietly circulating your fluids from the separated solar water heater to your storage tank. The 115v AC input voltage matches the output voltage provided from the controller for the system.
Variable speeds allow you to control how fast this pump pushes your hot fluids. If there is a need for more pressure to push through extra piping, higher speeds will do the trick.
All metal casing. This pump can handle very high temperatures. Perfect for solar water heater applications. The 1" inlet/outlets provide less restriction in flow of the fluids when passing through the pump. |
| |
|
